Table of Contents
Advertisement
3
Overview
The Kramer VS-84HDCPxl is a high−performance matrix switcher for DVI and
HDMI signals on a DVI−D connector. It reclocks and equalizes the signal and can
route any input to any or all outputs simultaneously.
DVI-D (Digital). Note that only the digital signal (DVI-D) is available on he DVI connector.
The VS-84HDCPxl features:
•
A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel)
•
HDTV compat bility, HDCP compliance
•
HDMI support for Deep Color, x.v.Color™, 3D Pass-Through, HDMI
Compressed Audio Channels
•
Fast Switching Technology that reduces switching delay between DVI/HDMI
sources
•
EDID PassThru that passes EDID signals from source to display
•
Output disconnect for each output
•
Front panel control lockout
•
Memory locations that store multiple switches as presets to be recalled and
executed when needed
•
Flexible control options including the front panel, IR remote, RS-232 (K-
Router™ Windows®-based software is included), Ethernet (Windows®-
based Ethernet Configuration Manager & Virtual Serial Port Manager is
included)
•
Worldwide power supply - 100-240V AC
•
Standard 19" rack mount size of 2U. Rack "ears" included
You can control the VS-84HDCPxl using the front panel buttons or remotely via:
•
RS-232 serial commands transmitted by a touch screen system, PC or other
serial controller
•
The Kramer infrared remote control transmitter
•
The Ethernet port
3.1
Defining the VS-84HDCPxl 8x4 DVI Matrix Switcher
This section defines the VS-84HDCPxl.
4
VS-84HDCPxl - Overview
Advertisement
Table of Contents
