SETTING THE DATE AND TIME
Set date and time.
Yes
No
Date/Time set
01 . 01. 2005
00 : 00
MM / DD / YYYY
:move
:sel.
:enter
Date/Time setup screen
The date/time setup screen can be opened in section 3 of the setup menu. For customers
in certain areas, the menu language must also be set. The language is changed in
section 1 of the setup menu (p. 73).
20
G
ETTING UP AND RUNNING
After initially inserting a memory card and batteries,
the camera's clock and calendar must be set. When
images are recorded, the image data is saved with the
date and time of recording.
If the clock and calendar have not been set, a
message is displayed for a few seconds each time the
1
camera is turned on. This message is also displayed
if the clock and calendar reset when the camera is
stored without batteries for a long period.
Use the left and right keys of the controller (1)
to select "Yes." "No" cancels the operation.
Press the center of the controller to open the
date/time setup screen.
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar.