Inserting Batteries - Konica Minolta DiMAGE Z2 Instruction Manual

Inserting batteries

This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types of AA bat-
teries. The camera should be off when replacing batteries.
3
1
2
5
4
To open the battery-chamber door, slide the lock to the open position (1).
Slide the door the the side of the camera (2) to release the safety catch.
Lift the door to open (3).
Insert the batteries as indicated on the diagram on the inside of the bat-
tery-chamber door. Confirm the positive and negative battery terminals
are oriented correctly.
Close the battery-chamber door and slide it toward the body (4) to
engage the safety catch. Slide the batter-chamber lock to the close posi-
tion (5).
After installing the batteries, the set-time/date message may appear on
the monitor. The clock and calendar are set in section 2 of the setup
menu (p. 18).
13