Automatic Configuration Setup (Auto Config) - Funkwerk V101 Operating Instructions Manual

Configuration through the Web Browser (V101, V102)
Other Settings
On the »Other Settings« page you can configure Hold mode through RFC and QoS (Quality of Service). Please follow the instructions given
by your provider when changing these settings.
Confirm your entries by clicking the »Submit« button.
The QoS value allows for prioritizing voice packets. Higher values mean higher priority for voice packets on the Internet. It should be noted
that any intervening systems on the Internet must support the QoS function.

Automatic Configuration Setup (Auto Config)

The »Auto Config« menu item takes you to the »Auto Configuration Setting« page. This page allows you to download configurations stored
on a TFTP or FTP server using the auto configuration function. This setup approach may come in handy for new users, allowing them to get
started right away by automatically downloading a ready-for-use configuration setup. Before you can activate Auto Configuration, you
must go to the »Network« setup page and select the »Bridge« and »Fixed IP« modes. After activating that function by clicking »On«, click the
»Submit« button.Do not forget to click the »Save« button in the »Save Change« window. The TA reboots now, then downloads the
predefined setup automatically from the TFTP or FTP server.
23