Time Synchronization Setup (Sntp Settings) - Funkwerk V101 Operating Instructions Manual

Configuration through the Web Browser (V101, V102)
Set Up Call Forwarding
You may enable all three call forwarding modes at the same time. In this case the TA will only use »Call Forward Unconditional« (All For-
ward). This call forwarding mode has the highest priority. The two remaining call forwarding modes may be active concurrently.
•
To enable the desired call forwarding mode, choose »On«.
•
Under »All Fwd No.:«, »Busy Fwd No.:« or »No Answer Fwd No.:« you can use the »Name« text box to enter a name
for the forwarding destination.
•
Under »URL« you enter either the phone number, the phone number in URL format or the IP address of the subscri-
ber to whom calls should be forwarded.
•
Under »No Answer Fwd Time Out« you specify the number of calls after which Call Forwarding on No Answer
should kick in and redirect calls to the specified destination. You can choose any number between 2 and 8 ringing
tones (»2~8 Ring«).
•
Confirm your entries by clicking the »Submit« button.

Time Synchronization Setup (SNTP Settings)

To ensure that your TA is synchronized with standard network time, it is recommended to choose a time server. This server may be installed
at an external location on the Internet as a so-called Public Time Server or reside in your own network. If you have configured a computer
within your network as a Time Server, enter the IP address of that computer here.
SNTP
•
To enable time synchronization choose »On«.
Time Synchronization
(Time Server)
•
Under the »Primary Server« and »Secondary Server« setup items, enter the IP addresses of the »time synchronizati-
on sources«. You can enter two different addresses to ensure that time synchronization remains active off an alter-
native server when the primary server goes down.
Time Zone
(Time Zone)
•
Here, enter the time difference between the standard time »Greenwich (Mean) Time« and your own location. For
Central Europe the time zone needs to be set to + one hour (+ 01:00). Please note that Daylight Saving Time may be
in force when setting the time zone.
Synchronization Time
(Sync. Time)
•
Use this option to specify at which time interval (»Sync. Time«) resynchronization with the time server should take
place.
•
Confirm your entries by clicking the »Submit« button.
12