Funkwerk v101 User Manual
  1. Manuals
  2. Brands
  3. Funkwerk Manuals
  4. Adapter
  5. V101
  6. User manual

Funkwerk v101 User Manual

Sip voip
Hide thumbs Also See for v101:
Table of Contents

Advertisement

Quick Links

V101
SIP VoIP Telephone Adaptor
User Manual
V1.1m

Advertisement

Table of Contents
loading

Related Manuals for Funkwerk v101

Summary of Contents for Funkwerk v101

  • Page 1 V101 SIP VoIP Telephone Adaptor User Manual V1.1m...
  • Page 2 C. Connect V101 RJ11 PHONE port to a Telephone Set. D. Connect the power adaptor to power on V101, and the POWER LED will be lit. In 5 seconds, the PHONE LED will start flashing 5 times and be ready for configurations.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Introductions ……………………………………………………………… Features ……………………………………………………………………… Standard Compliances …………………………………………… Packing Contents …………………………………………………… LED Indicators …………………………………………………………… Installations & SIP Configurations …………………… Default Reset from Telephone …………………………… Configurations from Web browser …………………… Configurations from Telephone ………………………… Applications Examples ………………………………………… Advanced Settings for Embedded NAT …………...

  • Page 4: Introductions

    1. Introduction The V101 is a single port Telephone Adaptor (TA) with SIP Protocols for Voice over IP (VoIP) applications. Connecting to the Internet, the V101 can make a voice phone call over the Internet from one IP to another. V101 provides two Ethernet LAN ports for connections to Internet and Notebook PC, plus one phone port for telephone set.

  • Page 5: Standard Compliances

    Please check if the packing is damaged or any component is missing. If so, please contact your distributor. 5. LED Indicators and Connectors On the front panel of V101, there are three LED indicators as the following POWER: “On” indicates the power is normal PHONE: “On” indicates the telephone is Off-hook “Flashing,”...

  • Page 6: Installations & Sip Configurations

    Connect V101 RJ11 PHONE port to a Plain Old Telephone Set (POTS). Connect the power adaptor to power on V101, and the POWER LED will be lit constantly. The PHONE LED indicators will be OFF for about 5 seconds and start flashing for 5 times, and remain OFF for VoIP configurations.

  • Page 7: Configurations From Web Browser

    8. Configurations from Web browser You can use Web browser to configure V101. First enter the IP address in the Web page. 8.1. Please enter the default IP address http://192.168.1.100 from PC Web browser. The following Web page should be displayed on PC. If you have difficulties accessing the Web page from the PC Web browser, the subnet IP of PC might be different from 192.168.1.xxx.

  • Page 8: System Information

    System Information 8.4. You will see the system information like firmware version, Codec, etc in this page. 8.5. You may click the button listed in the left hand side to configure the V101.
  • Page 9 Phone Book & Speed Dial 8.6. Phone Book page specifies Speed Dial function. 8.7. For Speed Dial function you can add/delete Speed Dial number up to maximum 10 entries in Speed Dial Phone List. 8.8. If you need to add a phone number into the Speed Dial list, you need to enter the position, the name, and the phone number (by URL type).

  • Page 10: Call Settings

    Call Settings 8.12. There are 8 sub pages as follows; Call Forward, SNTP, Volume, Block Settings, Caller ID, Auto-Dial Timer, Telephone Flash key (or hook switch), and Call Waiting functions. Call Forward function: You can select the forward mode and enter the forward URL. All Forward: All incoming call will forward to the URL you choose.
  • Page 11 SNTP Setting: 8.13. You can setup the primary and second SNTP Server IP Address, to get the date/time information. You may also set the Time Zone, and how long need to synchronize again. When you finished the setting, please click the “Submit” button. Volume Setting: 8.14.
  • Page 12 Block Setting: 8.15. You can setup the Block Setting to keep the phone silence. You can choose either Always Block or a Block period. 8.16. Always Block: All incoming call will be blocked until disable this feature. 8.17. Block Period: Set a time period and the phone will be blocked during the time period. If the time in “From”...
  • Page 13 Auto Dial Setting: You can set the timer for inter dial digit in this page. When the timer expires after finished dialing, V101 will start making the call. When you finished the setting, please click the “Submit” button. Flash Time Setting: You can set the time duration for the telephone flash key/hook switch in this page.
  • Page 14 Call Waiting Setting: The call waiting function allows users to answer another coming call by pressing flash key while holding the current call, and back to previous call by pressing flash key again. When you finished the setting, please click the “Submit” button. Call Transfer Setting: The call transfer function allows users to answer a coming call and to hold the current call by pressing flash key, and then transfer the current call to the desired party by dialing the...
  • Page 15 Network 8.19. You can check the Network status, and configure the Network Settings and DDNS settings in this section. Network Status: 8.20. You can check and show the current Network setting in this page.
  • Page 16 8.24. The Bridge mode is ON at default, and the two PC and LAN Ethernet ports will be transparent. This is useful when V101 is connected with external NAT router. 8.25. When you finished the setting, please click the “Submit” button.
  • Page 17 NAT Settings: 8.26. You must disable Bridge mode when using embedded NAT setting for V101 in this page. 8.27. The PPPoE Configuration item is for the PPPoE Username and Password. If you have the PPPoE account from your ITSP, you may enter the Username and the Password here.
  • Page 18 DDNS Setting: 8.29. You can configure the DDNS setting in this page. You need to have the DDNS account before entering the information. When you finished the setting, please click the Submit button.
  • Page 19 Settings for SIP in this page. Service Domain Settings: 8.31. You may register up to three SIP accounts in the V101. You can call your friends via first enabled SIP account and receive the phone from all the three SIP accounts.
  • Page 21 Codec Settings: 8.47. You can setup the Codec priority, RTP packet length, and VAD function in this page. You need to follow the ITSP suggestion to setup these items.
  • Page 22 Codec ID Settings: 8.48. You can setup the Codec ID in this page. You need to follow the ITSP suggestion to setup these items. Other Settings: 8.49. You can setup the Hold by RFC and QoS in this page. To change these settings please follows your ITSP information.
  • Page 23 TFTP server. After enabling the function, please click the “Submit” button. Remember to click “Save” in the Save Change section. The V101 will then reboot and automatically download the old configurations from the TFTP server. Note that the TFTP download...

  • Page 24: User Password

    8.51. You may change the login name and password in this page. Save Changes 8.52. You can save the changes you have made, and click the Save button. After clicking the “Save” button, the V101 will automatically restart and the new setting will get effect.
  • Page 25 Update 8.53. V101 provides two methods, HTTP or TFTP, to update new firmware as the following steps: 8.54. Select the firmware code type, Risc or DSP code. (mostly for Risc code) 8.55. Click the “Browse” button to choose the available file location for HTTP, or 8.56.
  • Page 26 8.57. After clicking the “Update” button, the firmware list will be displayed from server to indicate the available firmware for download. 8.58. Select the new file you want to download to the V101 then click the “Select” button. 8.59. In 3 to 4 minutes, the PHONE LED indicators will start flashing 5 times to indicate successful firmware update.
  • Page 27 Default Setting 8.62. You can restore the V101 to factory default in this page. By clicking the “Restore” button, the V101 will restore to default and automatically restart again.
  • Page 28 Reboot 8.63. You may click the Reboot button to restart, then V101 will automatically reboot with the stored configurations.

  • Page 29: Configurations From Telephone

    9. Configurations from Telephone You can use telephone to configure and to check the status of V101. Make sure that the LAN port is connected to Ethernet, or you may hear a busy tone from the telephone. Group IVR Action...

  • Page 30: Application Examples

    10. Application Examples You can use Web browser to configure V101. First enter the IP address in the Web page. Please enter IP address for web configurations. For example, enter http://192.168.1.100 from PC web browser. Diagram A. ADSL Connections without NAT Router for V101...
  • Page 31 Example 1: Direct IP Calling Applications: The applications are for ADSL connection without NAT router. Both parties are with fixed real IP. The Direct IP calling can work only when both calling and answering parties are with known fixed Configurations: 1.
  • Page 32 Example 3: SIP to Direct IP Calling Applications: The application is for the calling party with ADSL connection as in either Diagrams A or B. The calling party is registered to SIP server with either fixed real IP or private IP under NAT router.
  • Page 33 Example 4: 3-Way Conference Call, Call Waiting, Call Hold 3-Way Conference Calling Application: This is for 3-way conference call among Parties A, B, and C. Three parties are registered to SIP server with either fixed real IP or private IP. Callings: 1.
  • Page 34 Example 4: V101 SIP Calling for FreeWorld Dialup (FWD) Applications: This show how to use FWD as an example for free ITSP provider. The applications are for ADSL connection with NAT router. Both parties are registered to FWD SIP server.
  • Page 35 5. SIP Settings You have to enter the user name (including Display Name, User Name, Registered Name), Registered Password, Domain Server (fwd.pulver.com), Proxy Server (fwd.pulver.com), Outbound Proxy (fwdnat.pulver.com:5082), and Register Preiod (15 min). After finished the setting, click the Submit button and the Save Change button. The system will reboot automatically. After system boot up, the SIP setting page will show “Registered”, and the PHONE LED will start flashing.
  • Page 36 Callings: Pick up the phone, and you should hear a dial tone. (Your FWD phone number 636346). Press 12345# to call the party with the registered phone number 12345. Note # is used to send out the call immediately. Dialing without # will not dial out until the auto dial timer (default=5 seconds) elapsed.
  • Page 37 11. Advanced Settings for Embedded NAT You may activate the embedded NAT server in V101. This NAT function is sometimes useful for ADSL/Cable user without external NAT router as in Diagram A. First, enter the IP address in the Web page. For example, enter http://192.168.1.100...

  • Page 38: Lan Setting

    NAT Settings 3. The NAT settings page will be shown as follows. LAN Setting: Enable the embedded DHCP Server function for VS211 and PC to get private IP addresses automatically from the embedded NAT server. WAN Setting: 5. You may select PPPoE function, and enter the given username and password for ADSL connection.
  • Page 39 6. Click the Save button to save these settings. 7. After clicking the Save button, the V101 will show a Note Information page as the following and will automaitcally restart.

  • Page 40: Advanced Settings For Embedded Nat

    12. Trouble Shooting for Web Configurations 12.1. CAN NOT ACCESS WEB PAGE? PC Web Browser is a useful tool to configure V101. When you first enter from PC web browser the default IP address http://192.168.1.100 of V101 as in the following figure and experience difficulties in accessing the V101, the most possibility is that the PC might have different subnet IP settings from 192.168.1.xxx.
  • Page 41 - Click on "Use the following IP Address". - Enter IP: 192.168.1.50 (50 can be any number other than 100, which is used by V101). - Enter Subnet mask: 255.255.255.0 - Enter Default gateway: 192.168.1.100 - Click on OK button.
  • Page 42 Funkwerk Enterprise Communications GmbH - Südwestpark 94 - D-90449 Nürnberg Telefon: +49 - 180 300 9191 0 Telefax: +49 - 180 300 9193 0 E-Mail: info@funkwerk-ec.com - www. funkwerk-ec.com...

Table of Contents