Overview Of Authorizations; Overview Of The Programming Commands; Table 2: Authorizations; Table 3: Programming Commands - Kaba Combi B 30 Operating Instructions Manual

5

Overview of authorizations

The authorizations of individual operators are as follows:
Code
Operator ID
designation
- Inspection key
00 Master code
01..30 User codes
95 Courier code
- Assembler code

Table 2: Authorizations

6

Overview of the programming commands

Action
Changing own code
Reading out audit
Activating + deactivating OD/OST
Activating user
Blocking + releasing user
Deleting user
Code status query
Activating + deactivating double code
Activating + deactivating silent alarm
Acknowledging the take-off contact message
Resetting the lock
Reassignment of the master code

Table 3: Programming commands

Version 2013-08-10
Page 32 of 48
Authorization
- Opening without OD/OST and without guard time
- Assigning of a new master code
- Resetting the lock
- Changing the lock configurations using software without
knowing the master code or changing it.
- Opening, if necessary, with silent alarm
- Changing of the own code
- Activating, blocking, releasing, deleting user and courier, with
activated double code as well
- Activating / deactivating double code
- Programming / deleting OD/OST
- Neutralising the take-off contact
- Reading out audit
- Activating, deactivating silent alarm
- Access via PC software
- Opening, if necessary, with silent alarm
- Changing of the own code
- Opening without OD/OST, if necessary, with silent alarm
- Changing of the own code
- Opening
- Valid only until the real start-up of the lock,
NOT A REAL CODE, not suitable for permanent use
Operating instructions 82132/3xxx CB 30
Command Authorization
P each
P1
P2
P3
P4
Master
P5
P6
P7
P8
P9
P0
Key
P