Transmitting Originals By Using Both The Adf And The Platen Glass - Konica Minolta bizhub C450 Fax Manual

3
3.2.4 Transmitting originals by using both the ADF and the plat-
en glass
You can scan originals by using both the ADF and the platen glass and you
can also scan the large amounts of originals by placing them on the ADF in
several times.

Transmitting originals by using both the ADF and the platen glass

1
If the fax screen is not displayed, press [Fax] on the control panel to
open the fax screen.
2
Select a destination.
3
Set the desired functions as necessary.
4
Place the original on the platen glass.
Press [Scan Setting] - [Separate Scan]
- [OK] and then press [Start].
– Document placed on the ADF will
take precedence over those on the
platen glass.
– For details, refer to "Placing the
original on the machine" on
page 3-7.
5
Place the next original on the ADF or
the platen glass and press [Start].
– Repeat this procedure until all orig-
inals to be sent have been scanned.
The scanned originals are stored in
memory.
6
Press [Finish].
The Document reading mode is canceled.
7
Press [Start].
Transmission begins.
3-10
Transmission
C450