To Perform A Quick Memory Transmission - Konica Minolta bizhub C450 Fax Manual

3

3.12.3 To perform a quick memory transmission

Quick memory transmission
1
Press [Fax] on the control panel to view the fax screen, if it is not al-
ready displayed.
2
Press [Comm. Setting] on the fax screen.
3
Press [Quick Memory TX].
4
Press [OK].
– To cancel the setting, press [Cancel].
The quick memory TX is set to return to the fax screen.
5
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-11 for setting
functions on the fax screen. See "Opening the scan setting screen
and comm. setting screen" on page 7-3 for setting functions on the
fax application screen.
6
Designate the destination.
– For details, refer to "Selecting one destination" on page 3-21.
7
Set the original document.
– For details, refer to "Placing the original on the machine" on
page 3-7.
8
Press [Start].
The FK-502 reads the document and stores it in memory as a reserved
document before transmission starts.
3-42
Transmission
C450