Testing The Fishfinder Application; Setting The Nmea For Ais Or Navtex - Raymarine C-series Installation Manual

87020-3.book Page 41 Tuesday, March 7, 2006 11:02 AM
Chapter 4: Commissioning the system
3. Zoom out with the RANGE button until the world map is visible.
4. To ensure that the display is responding to position data:
i. Press FIND SHIP.
ii. Check that the cursor is positioned over the boat symbol in the centre of the dis-
5. Insert a chart card containing a suitable chart for the area in which you are located.
Once inserted, the chart should redraw with the cartridge chart boundaries dis-
played.
Note:
Flash cards in the Reference Manual.
6. Zoom in with the RANGE button to check that chart data is being displayed.

Testing the Fishfinder application

For the fishfinder application to function it must be connected to a DSM 250 or 300.
The status of your DSM is indicated by the boat/fish icon in the data bar (top right-hand
corner of the screen):
DSM status icon
1. Press PAGE and select a full window fishfinder application.
2. Using the soft keys, check that individual settings change as they are selected.

Setting the NMEA for AIS or Navtex

If you have a Navtex or AIS receiver attached to the NMEA port, you will need to
change the NMEA Port Setting. This feature is accessed via the System Setup Menu /
System Integration Setup Menu.
play.
For details of how to insert a chart card, please refer to Section 2.7, Using Compact-
DSM status description
Successful connection to a DSM and transmitting.
(animated icon)
DSM connected but not transmitting.
(static icon)
No DSM connected/recognized.
(greyed-out icon)
41