Engine Unit (See Page - Xerox WorkCentre XK50cx Service Manual

3-17 Cartridge Assembly
1. Before you disassemble the FPC cable you
should remove:
All covers (See page 3-2, 3-9)
ADF Scanner unit assembly (See page 3-3)

Engine unit (See page 3-15)

ASF unit (See page 3-16)
Holder harness (See page 3-16)
2. Rotate to remove both springs securing the
carrier shaft. Then take out the carrier shaft.
3. Remove the C-cab.
4. Push the holder pulley to the right and take out
the belt.
5. Take out the cartridge carrier from the main frame.
Disassembly and Reassembly
3-17