Scanner Unit - Xerox WorkCentre XK50cx Service Manual

3-7 Scanner Unit

1. Before you disassemble the scanner, you should
remove:
ADF Scanner unit assembly (See page 3-3)
Before you assemble or disassemble the
scanner, you should take on the wrist strap
device for ESD protection. (See 1-2 ESD
precausions)
2. Lift and open the platen cover.
3. Pull the cover upward and remove it.
4. Unlatch the frame securing the glass and
remove it.
5. Remove four screws and take out the glass from
the scan upper cover.
Disassembly and Reassembly
3-7