Jensen JMC-1250 User Manual page 9

Bluetooth 3-speed stereo turntable 3 cd changer music system with dual cassette deck
Hide thumbs Also See for JMC-1250:
Table of Contents

Advertisement

C. RECORDING FROM CD
Press the CD BUTTON (#10) to enter CD Mode.
Insert a blank cassette tape in deck 1 which suitable for recording.
Press the "PAUSE" button first and then "RECORD" & "PLAY" key at deck 1.
Recording function is now on STANDBY.
Activate the CD player, and then press the "PAUSE" key at deck 1 to start
recording.
To stop recording, press the "STOP" button on CD player first, then press the
"PAUSE" key and then the "STOP/EJECT" key at deck 1.
D. RECORDING FROM THE TURNTABLE
Press the PHONO/BLUETOOTH/AUX BUTTON (#24) to enter Phone Mode.
Place a record onto turntable and insert a blank cassette tape into deck 1.
Press the " PAUSE " key and then press the " RECORD " and " PLAY " key at
deck 1.
Place tone arm to start playback the record and then press " PAUSE " key at
deck 1 to start recording.
Press " PAUSE " or " STOP " key at deck 1 when finish.
MORE FEATURES
A. S LEEP TIMER S ETTING
1. Press and hold the SLEEP/TIMER BUTTON (#11) on main unit or the
"SLEEP" button on remote, to active and adjust the sleep timer in the order
of 90 > 80 >70....10 minutes automatically. Release the button at sleep
timer you want to select. The LCD display (#2) will show SLEEP.
2. System will stop and go to STANDBY mode automatically after the selected
timing.
3. To cancel the sleep mode, press SLEEP/TIMER BUTTON (#11) on main
unit or "SLEEP" on the remote once, " SLEEP " indicator on the display
disappears.
B. ON/OFF TIMER S ETTING (BY REMOTE ONLY)
This function allows the system to turn on automatically and wake you up by
soft CD music or with the radio and shut itself off (standby mode) when time is
up.
1. In unit standby mode, press the MODE button on remote once, the LCD
display (#2) will show " ON" and flash.
2. Press and hold MEM/CLOCK-ADJ button (#14) a few seconds, the hour
digits will flash. Press SKIP UP/ DOWN buttons (#28/12) to set the hour.
3. Press MEM/CLOCK-ADJ button (#14) to confirm. Minute digits will flash and
prompt for input.
4. Press the SKIP UP/ DOWN buttons (#28/12) to set the minute. Press
MEM/CLOCK-ADJ button (#14) to confirm.
5. Press " MODE " button on remote again to set the timer ending time. "
OFF" timer will appear and flash.
6. Follow above step 2-4 to set OFF timer.
7. Press the "MODE" button on remote to confirm, " " icon flash and timer
source CD/PHONO/TUNER/TAPE appears on the display.
8. Press the MEM/CLOCK-ADJ button (#14) once, timer source flashing.
9. Press the SKIP UP/ DOWN buttons (#28/12) to set source to be controlled
by timer and then press the MEM/CLOCK-ADJ button (#14) to finish.
10. You can press the " MODE " button repeatedly to review the presets time in
order.
NOTE: 1. The timer setting will automatically cancel if no button is pressed in a
period of about 10 seconds.
2. If you set ON/OFF timer for PHONO or TAPE, please make sure
record or pre-recorded tape is installed and tone arm or cassette
PLAY key is set and ready to play.
ACTIVE/DE-ACTIVE THE TIMER FUNCTION
1. To active the timer function, press the SLEEP/TIMER button (#11) on main
unit or "TIMER" button on remote once, the timer indicator
LCD DISPLAY (#2).
2. To cancel the timer function, press the SLEEP/TIMER button (#11) on main
unit or "TIMER" button on remote until the timer indicator "
C. PRESET EQ FUNCTION
This unit provides 5 differences sound modes to enhance your listening experience.
You can select the desired effect by pressing the PRE-SET EQ BUTTON (#21)
repeatedly to get the effect you want:-
FLAT
JAZZ
ROCK
X-BASS OPERATION
Press the X-BASS Button (#4) to enhance the bass effect of the music being
played. Press the X-BASS Button again to turn the effect off.
USING HEADPHONE
Headphones are not supplied with this Music system. You will require headphones
fitted with a 3.5 mm diameter stereo plug and an impedance of 32 ohms. Plug your
headphones into the HEADPHONE JACK (#19) on the front of the unit for private
listening. After plugging in the headphone, the speakers will be automatically
disconnected.
WARNING : ALWAYS LOWER THE VOLUME LEVEL BEFORE PUTTING ON
YOUR HEADPHONES. OTHERWISE YOUR HEARING COULD BE
DAMAGED.
E-16
is shown on
" disappear
CLASSIC
POP
E-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents