Aux In Operation; Stop Mode; Search Mode - Jensen JMC-1250 User Manual

4. Don't forget to switch off the power of your Bluetooth device as well.
5. The music playback will automatically be paused when you have an incoming
call. When the call is ended, the JMC-1250 will start playing again.

AUX IN OPERATION

You can play other music sources (iPod, MP3 or other digital audio players)
through the speakers of the JMC-1250 by connecting the AUX IN Jack (#37) to
your external player's audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN Jack (#37) and the
other end of the cable to the headphone jack of your digital audio
2. Press POWER ON/STANDBY BUTTON (#7) to turn on the JMC-1250.
Press PHONO/BLUETOOTH/AUX BUTTON (#24) repeatedly to select AUX
3.
Mode. The LCD DISPLAY (#2) will show AUX.
4. Start playing the device you plugged into the AUX IN Jack
5. Slowly adjust both the volume controls of your JMC-1250 and the external
device until you reach a comfortable listening level.
Note :
• If you connect JMC-1250 to the Line-Out Jack of your external device, you
the
only need to adjust the VOLUME CONTROL of your JMC-1250. If you connect
to the Headphone Jack of your external device, you may need to adjust both
the volume controls of your external device and
desirable listening level.
• Remember to turn off the JMC-1250 when you have finished listening. Don't
forget to switch off the power of your external audio device as well.
CD OPERATION
LOADING THE DISCS
1. Press the POWER ON/STANDBY BUTTON (#7) to turn on the JMC-1250.
2. Press the CD BUTTON (#10) to enter CD Mode. The LCD DISPLAY (#2) will
show CD.
3. Press the CD DOOR OPEN/CLOSE BUTTON (#27) to open the CD DOOR
(#17).
4. Place a CD with the printed side facing up inside the tray.
5. Press the DISC SKIP BUTTON (#23) to select another location on the CD tray.
Load another CD. You can load up to 3 CDs at a time by repeating the step.
6. Press the CD DOOR OPEN/CLOSE BUTTON (#27) again to close the CD
DOOR (#17).
7. CD search will be performed; the display will show the total number of discs,
number of tracks and playing time of the disc.
Note: CD searching will be performed every time when you switch to CD mode or if
you close the CD door. All CD functions will start responding when the CD
searching is completed.
CD PLAY / PAUSE MODE
1. Press the PLAY/PAUSE BUTTON (#22) to start playback. The first track of the
first disc will be played and the play indicator will appear on the LCD DISPLAY
(#2).
2. You can also press either the " DISC 1", " DISC 2 ", " DISC 3 " buttons on the
remote control to start playing a specific disc in the tray.
3. To interrupt, press the PLAY/PAUSE BUTTON (#22) once, and the display will
start flashing. Press again to resume playback.

STOP MODE

1. If the STOP BUTTON (#8) is pressed during PLAY or PAUSE, the system will
go into stop mode.
SKIP MODE (SKIP UP /SKIP DOWN
1. During PLAY or PAUSE mode, if the
pressed, the player will go to next track and display the track no. and then
remain the PLAY or PAUSE mode.
2. During PLAY or PAUSE mode, if the
pressed, the player will go back to the beginning of the track. Press the
again will go to the previous track
TUNING DOWN BUTTON (#12)
SEARCH MODE (SEARCH UP /SEARCH DOWN )
1. During PLAY mode, if the
SKIP / TUNING UP
for few seconds, it will start searching forward.
2. During play mode, if the SKIP / TUNING DOWN
held for few seconds, it will start searching backwards.
REP EAT P LAY
This function allows you to repeat 1 single track, 1 single disc or all discs:-
Press the REP/RAN BUTTON (#9) repeatedly to switch the function:-
REP. ALL DISC REP. 1 DISC
Note: Single track repeat function is possible in normal or programmed playback,
repeat one disc or all discs is only available in normal playback.
RANDOM P LAY
You can listen all the tracks of all available discs in a random order by using this
function
1. Press and hold the
REP/RAN BUTTON
All tracks of all the discs will be played in random order.
2. Press and hold the
REP/RAN BUTTON
randomly.
All tracks of 1 disc will be played in random order.
3. Press and hold the
REP/RAN BUTTON
randomly random playback.
player.
(#37)..
JMC-1250 to obtain the
the
E-12
)
SKIP / TUNING UP BUTTON (#28)
SKIP / TUNING DOWN BUTTON (#12)
SKIP /
.
is pressed & held
BUTTON (#28)
BUTTON (#12) is pressed &
REP. 1 TRACK REP. OFF
(#9), the unit will play all discs randomly.
(#9) again, the unit will play 1 disc
(#9) again, the unit will cancel the
E-13
is