Jensen JMC-1250 User Manual

Jensen JMC-1250 User Manual

Bluetooth 3-speed stereo turntable 3 cd changer music system with dual cassette deck
Hide thumbs Also See for JMC-1250:

Advertisement

BLUETOOTH 3-SPEED STEREO TURNTABLE 3 CD
CHANGER MUSIC SYSTEM WITH DUAL CASSETTE DECK
USER MANUAL
JMC-1250
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The Caution Marking is located at the back enclosure of the apparatus.
The Rating plate is located at the back enclosure of the apparatus
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that product heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for a long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15. This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquids such as vases shall be placed on the apparatus.
E-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JMC-1250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jensen JMC-1250

  • Page 1 BLUETOOTH 3-SPEED STEREO TURNTABLE 3 CD CHANGER MUSIC SYSTEM WITH DUAL CASSETTE DECK USER MANUAL JMC-1250 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
  • Page 2: Compliance With Fcc Regulations

    16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19.
  • Page 3: Protect Your Furniture

    The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number : JMC-1250 Serial Number : LOCATION OF CONTROLS...
  • Page 4: Remote Control

    DUST COVER 20 REMOTE SENSOR LCD DISPALY 21 PRE-SET EQ BUTTON VOLUME UP/DOWN BUTTON 22 PLAY/PAUSE BUTTON X-BASS BUTTON 23 DISC SKIP BUTTON STANDBY LED INDICATOR 24 PHONO/BLUETOOTH/AUX BUTTON FM MODE / DUBBING SPEED 25 TUNER/BAND BUTTON SELECTOR POWER ON/STANDBY BUTTON 26 TAPE BUTTON STOP 27 CD DOOR OPEN/CLOSE BUTTON...
  • Page 5 Setting the Radio Station Presets The JMC-1250 allows you to store up to 40 station presets ( AM-20 and FM-20 ) for easy recall at any time. 1. Press the POWER ON/STANDBY BUTTON (#7) to turn on the JMC-1250.
  • Page 6: Phono Operation

    4. Turn on the Bluetooth function for the device you want to link to, and enable the search or scan function to find the JMC-1250. 5. Select "JMC-1250" from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) JMC-1250 with your device.
  • Page 7: Aux In Operation

    Mode. The LCD DISPLAY (#2) will show AUX. 4. Start playing the device you plugged into the AUX IN Jack (#37).. 5. Slowly adjust both the volume controls of your JMC-1250 and the external device until you reach a comfortable listening level. Note : •...
  • Page 8 BUTTON (#8) to stop playback and press it twice to clear all programmed track TAPE OPERATION GENERAL OPERATION Press POWER ON/STANDBY BUTTON (#7) to turn on the JMC-1250. Press TAPE BUTTON (#26) to enter Tape Mode. The LCD DISPLAY (#2) will show TAPE. STOP / EJECT KEY Press to stop all deck operations.
  • Page 9 C. RECORDING FROM CD Press the CD BUTTON (#10) to enter CD Mode. Insert a blank cassette tape in deck 1 which suitable for recording. Press the “PAUSE” button first and then “RECORD” & “PLAY” key at deck 1. Recording function is now on STANDBY. Activate the CD player, and then press the “PAUSE”...
  • Page 10: Care And Maintenance

    CARE AND MAINTENANCE 1. Do not subject the unit to excessive force, shock, dust or extreme temperature. 2. Do not tamper the internal components of the unit. 3. Clean your unit with a dry cloth. Solvent or detergent should never be used. 4.
  • Page 11: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The unit is disconnected from Reconnect to the AC outlet. The unit does not the AC outlet respond (no Plug another device into the power) AC outlet is not functioning. same outlet to confirm the outlet is working.
  • Page 12 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.

Table of Contents

Save PDF