Functions, Buttons And Controls; Place The Amplifier And Connect The Chosen Loop Solution - Univox DLS-50 User Manual

Functions, buttons and controls

Switched Head-
power phones Loop pad/
supply
Place the amplifier and connect the chosen
loop solution
Place the loop amplifier in a suitable place near the TV/stereo. If there is a need, use the
velcro pads included to fasten the amplifier to the side or back of the TV. The amplifier
has a very efficient cooling and can therefore get hot in use, as the metal case leads off
the heat from the electronics. For this reason, avoid the amplifier coming in contact with
delicate materials.
Loop pad
Put the loop pad under/on the cushion in the sofa/chair where you want to sit when
watching TV. Connect it to the DIN output in the rear panel.
Sofa loop
Attach the sofa loop underneath the sofa (be careful if you use a stapler) or put the loop
on the floor around the sofa, for example underneath the carpet under the sofa. Connect it
to the DIN output in the rear panel.
4
Room loop
sofa loop
TV/
Stereo/
TV/Stereo
Micro-
phone
Microphone
Microphone
sensitivity