Pride Revo Owner's Manual page 32

V I I I . D I S A S S E M B L Y
Toggle Latch Release
1. Push in the toggle latch release button while pulling back the toggle latch. See figures 18 and 18A.
2. Secure the toggle latch buckle over the top of the toggle latch. See figure 18B.
3. Grab the hand grip on the tiller, loosen the tiller adjustment knob, and gently lower the tiller down to the centre
of the scooter floorboard.
4. Fully tighten the tiller adjustment knob.
TOGGLE LATCH RELEASE BUTTON
TOGGLE LATCH
Figure 18. Toggle Latch
(Latched)
Frame Separation
1. Push back on the seat post to pivot the scooter’s rear section rearwards until it is standing vertically on its rear
bumper. See figure 19.
2. Lift the front section up until the rear pegs are no longer in the locking brackets. See figure 20.
3. Carefully move the front section away from the rear section.
Figure 19. Frame Positioning
32
TOGGLE LATCH BUCKLE
Figure 18A. Toggle Latch
(Unlatched)
LOCKING
BRACKETS
Figure 20. Frame Separation
www.pridemobility.com
A N D A S S E M B L Y
Figure 18B. Toggle Latch
(Secured For Disassembly)
PEGS
Revo/Rev A/December 2003