Wcdma Transmitter Troubleshooting - Nokia RM-598 Service Manual

RM-598; RM-604
RF Troubleshooting

WCDMA transmitter troubleshooting

Steps
1. Set the phone to local mode.
2. In Phoenix, select Testing→WCDMA→Tx control . The Tx Control window opens.
3. Make settings for the band to be tested, according to the following table:
Band
WCDMA I
WCDMA II
WCDMA V
WCDMA VIII
4. Make the following general settings (the same values for all bands). Note that Max power limit is not
checked by default.
Issue 1
Figure 21 Phoenix WCDMA Tx control window
9750
9400
4183
2788
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Channel
Page 4 –21