Wcdma Transmitter Troubleshooting - Nokia 6267 RM-210 Service Manual

RM-210
RF troubleshooting
Figure 16 Typical readings
4. Change power level (RF controls) and make sure the power reading follows accordingly.
Next actions
If you want to troubleshoot the other bands, change band with RF controls and set the communication
analyser accordingly.

WCDMA transmitter troubleshooting

Steps
1. Set the phone to local mode.
2. In Phoenix, select Testing→WCDMA→TX control .
3. In the TX control window, make settings as shown in the picture:
Star level is the expected power out.
Note:
Page 4 –16 COMPANY CONFIDENTIAL Issue 1
Copyright © 2007 Nokia. All rights reserved.