Before first Use
Unpack the spindle sander and check all parts for any damage in transit.
Dispose of packaging materials or store it out of reach of children. Plastic bags
etc. may become a deadly toy for children.
The spindle sander is supplied only partly assembled to ensure optimum
transport protection.
Intended Operation
The spindle sander is designed for dry sanding only. The spindle sander is
intended for shaping and finish sanding of interior and exterior edges of
wooden workpieces.
Never use the spindle sander for wet sanding. Do not sand any mineral.
Bench Mounting
For stationary operation the spindle sander can be mounted in a permanent
position on rigid work surface (e. g. workbench).
1. Place the spindle sander on the workbench and drill four holes through the
base of the machine.
2. Secure the spindle sander into position on the workbench using large bolts,
washers and nuts (not supplied).
Dust Extraction
For clean and safe work, we recommend using the spindle sander with a dust
extraction system.
1. Attach the hose from the dust extraction system to the dust extraction port
(3) and make sure it is securely fixed.
2. Switch on the dust extraction system before turning on the spindle sander.
Operation
16