Can-I/F Setup; Setting The Default Vehicle Screen; Setting The Climate Interrupt Time; Setting The Parking Sensor Interrupt On/Off - Alpine HALO 9 INE-F904D Owner's Manual

CAN-I/F Setup

[CAN-I/F] is selected on the System Setup Menu screen in step 1. See
"System Setup" (page 41).
• CAN I/F BOX should be connected before this operation.

Setting the Default Vehicle Screen

Touch the Menu screen (page 18) to display the Info mode screen, and
then set the following.
Setting item:
Default Vehicle Screen
Setting contents:
Climate / Park sensor / Last mode (Initial setting)
• For details on the Vehicle Info mode screen, see "About Vehicle Interlock
Function" (page 74).

Setting the Climate Interrupt Time

You can set the time displayed in the Climate screen.
Setting item:
Climate screen interrupt time
Setting contents:
None / 5 sec (Initial setting) / 10 sec / Continuous display
None: The Climate screen is not displayed when you adjust the
air conditioner, etc.
5 sec/10 sec*: The screen is displayed for 5 seconds/10 seconds, then
returns to the previous screen.
Continuous The Climate screen is continuously displayed.
display:
* If you set the air conditioner, etc., while the Climate screen is displayed,
the screen will continuously be displayed.
• For details, see "About Vehicle Interlock Function" (page 74).

Setting the Parking Sensor Interrupt On/Off

Set to "On" to display the Parking Assist screen if a vehicle detects an
obstacle.
Setting item:
Parking sensor interrupt
Setting contents:
Off / On (Initial setting)
• For details, see "About Vehicle Interlock Function" (page 74).
44
-EN

Unit Setup

[Unit] is selected on the System Setup Menu screen in step 1. See
"System Setup" (page 41).
Make this setting when you use an external audio processor.

Setting the External AP

When using an external audio processor, set to "On" (
Setting item:
External AP
Setting contents:
Off (Initial setting) / On
• When this setting is "On, " the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-OVER/Time Correction/Defeat/Phone
Speaker/Default Sound Settings are set to "Off " or "Flat" and cannot be
adjusted.
• Use the external AP to adjust volume.
).