Rear Seat Entertainment Setup; Remote Sensor Setting; External Accessories Setup; Setting The External Audio Processor - Alpine 9ZUA147 Manual

Rear Seat Entertainment Setup

[Rear Seat Entertainment] is selected on the System Setup Menu screen
in step 1. See "System Setup" (page 44).
When a Rear monitor equipped with HDMI input is connected to this
unit, change this setting to "On. " You can output images to the Rear
monitor. For details, see "Rear Seat Entertainment Function" (page 19).
Setting item:
Rear Seat Entertainment
Setting contents:
Off (Initial setting) / On
• When this setting is "On, " you can use this unit to switch the
Plasmacluster or Illumination of a Rear monitor with the Plasmacluster
function or Illumination function.
Setting the Rear Seat Entertainment System
Make sure the Rear Seat Entertainment is set to "On" (
Seat Entertainment Setup" (page 48).
Setting item:
Plasmacluster/Illumination Color
Setting contents:
Off (Initial setting) / On
• For details on adjusting Plasmacluster/Illumination, see "Rear Seat
Entertainment Function" (page 19).
• When the Rear Seat Entertainment setting is set to "Off, " you cannot
select this item.
• Set the coordination color and Plasmacluster controls on the Rear
monitor to "Navi. " When set to "Rear monitor, " you cannot operate
them from this unit.
48
-EN

Remote Sensor Setting

Make sure the Rear Seat Entertainment is set to "On" (
Seat Entertainment Setup" (page 48).
For remote control operation, the remote sensor of the external device
(Rear monitor, etc.) can be switched, as you prefer.
Setting item:
Remote Sensor
Setting contents:
Front (Initial setting) / Rear
Front:
Rear:
• You can also control this setting from the Rear Seat Entertainment
System Setup screen. For details, see "Rear Seat Entertainment
Function" (page 19).
). See "Rear

External Accessories Setup

[External Accessories] is selected on the System Setup Menu screen in
step 1. See "System Setup" (page 44).

Setting the External Audio Processor

When using an external audio processor, set to "On" (
Setting item:
External Audio Processor
Setting contents:
Off (Initial setting) / On
• When this setting is "On, " the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-Over/Time Correction/Defeat/Phone Speaker/
Default Sound Settings are set to "Off " or "Flat" and cannot be
adjusted.
• Use the External Audio Processor to adjust volume.
The remote sensor of this unit is effective.
The remote sensor of Rear monitor is effective.
). See "Rear
).