Sleep Number® Bed; Day/Night Pleated Blinds - Winnebago Meridian ITASCA User Manual

Hide thumbs Also See for Meridian ITASCA:
Table of Contents

Advertisement

SECTION 9 –
FURNITURE AND SOFTGOODS
WARNING
To avoid injury to young children, do not
allow them to operate the sofa, or to play
within the sofa or near the operating
mechanism.
SLEEP NUMBER
by Select Comfort
–If Equipped
NOTE: The Sleep Number bed operates on 120-
volt AC household current only, so you
must have the shoreline plugged in or the
generator running to adjust the air
pressure settings in this bed.
Further Information
For further information and operating
cautions, see the Sleep Number bed operating
instructions included in your InfoCase.

DAY/NIGHT PLEATED BLINDS

–If Equipped
Your coach may feature two-stage pleated
window blinds that can be used for light filtering,
daytime room darkening, or nighttime privacy.
They are raised or lowered by grasping the
bottom edge of the desired blind section and
moving it up or down by hand.
A constant-tension cord system holds them at
the desired level without slipping.
9-6
®
BED
Sun Filter
The lower section is a translucent white shade
that can be lowered for privacy without
darkening the inside of the coach. It can also filter
out harsh direct sunlight to help keep the inside of
the coach cool in summer or to disperse light for
houseplants.
Room Darkening/Privacy Shade
The upper section is an opaque, darkening
shade for nighttime privacy and daytime room
darkening purposes. Pull both sections down
together or separately.
Tension Adjustment:
The tension of the pleated blinds can be
adjusted if they become loose and will not stay up
when raised, or they are too tight and are difficult
to raise and lower.
The tension cords are attached to spools at the
lower corners of the blinds as shown in the
following photo.
To tighten tension
Wrap the tension cords around the mounting
spools–one turn at a time–at both ends of the
shade. Check tension by raising and lowering a
few times. Repeat as necessary to obtain the
desired tension. Do not over-tighten.
To loosen tension
Unwrap the guide cords from the spools–one
turn at a time–until desired tension is achieved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Journey

Table of Contents