Removing The Primary, Secondary, And Monitor Interlock Switches - Whirlpool SPEEDCOOK GH6208 XR Technical Education

REMOVING THE PRIMARY, SECONDARY, AND
MONITOR INTERLOCK SWITCHES
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave oven or disconnect
power.
2. Open the microwave oven door.
3. Remove the relay control board and its
panel from the unit (see pages 4-7 and
4-8 for the procedure).
4. Remove the T10 torx screw for the
switch(es) you are servicing.
Secondary
Switch Screw
Right Panel &
Relay Control
Board
Primary &
Monitor Switch
Screw
5. Insert a small screwdriver blade into each
of the switch actuator slots, and rotate
the switch actuators to unlock them, then
remove the switch assemblies from the
oven.
Push To Rotate
Switch Actuator
6. Disconnect the wires from the switch ter-
minals.
7. Carefully bend the two locking tabs so
they disengage from the switch, and pull
the switch off the holder pins.
RD & WH
Monitor Interlock
4-16
Secondary Interlock
BU & GR
BN & WH
Sw. Tabs
Primary Interlock
2 BR
BR & WH
BU
OR