Hood Motor location
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. The hood motor is located on the left side of the unit and can
be serviced by removing the outer wrapper.
Interlock Switch Replacement
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Remove two Torx
screws on the right front of cavity. Open
†
the door to access these.
2. The control panel must be removed to access the switches
after these Torx screws are removed.
†®Torx is a registered trademark of Acument Intellectual Properties, LLC.
Low Profile Microwave Hood Combination
COMPONENT ACCESS
n
4-7