Removing The Relay Control Board And Line Fuse - Whirlpool SPEEDCOOK GH6208 XR Technical Education

REMOVING THE RELAY CONTROL BOARD AND LINE FUSE

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug microwave oven or disconnect
power.
2. Open the microwave oven door.
3. Pull the two tabs and remove the center
air flow screen from the top of the cabi-
net.
Center Air Flow Screen
4. Remove the four indicated screws from
the right panel cover, then pull the cover
forward, and remove it.
5. Remove the screw from the right panel.
Screws
Continued on the next page.
4-7
Right
Panel
Cover
Right
Panel
Screw