Whirlpool SPEEDCOOK GH6208 XR Technical Education page 36

c) Lift the bottom cover and remove the
four indicated screws from the exhaust
motor and U bracket.
d) Pull the exhaust fan motor shaft off the
coupler.
Motor U
Bracket
4 Exhaust
Motor Screws
Exhaust Fan
Motor Coupler
e) Remove the two T10 torx screws from
the exhaust fan housing, and remove
the housing from the motor and fan.
f) Pull the blower off the motor shaft.
Screws
g) Remove the four screws from the
housing cover and remove it from the
motor.
Housing Cover
4-4
Exhaust Fan
Motor
Fan Housing
Screw (1 of 4)
Exhaust Fan Motor