AEG AR 4026 DVD Instruction Manual page 36

English
36
Once the connection has been successfully established, the
name of your mobile telephone appears in the display of the
car radio.
Ending a telephone call
In order to end an outgoing or incoming telephone call,
please press one of the following buttons:
• I
(Fig. 2/9) on the device
• /INT (Fig. 1/7) on the remote control
• on the touch-screen of the BT menu
CALL END appears on the touch-screen.

NOTE:
In order to reject an incoming call you can also press one of
the above buttons.
Bluetooth menu
The submenus CALLING, MUSIC, HISTORY and PHONE
BOOK are shown on the left-hand edge of the touch-screen.
• CALLING
In this menu

NOTE:
If you have entered one or more numbers incorrectly,
you can delete the numbers with the BND/C/RDM (Fig.
1/23) key or with „CLEAR" on the touch-screen.
• Short press: the numbers are deleted individually.
• Long press: all of the numbers that have been
entered are deleted.
• MUSIC
In this menu you can control music playback. See the
section on "Music Playback via A2DP (Advanced Audio
Distribution Profile)" on page 37.
• HISTORY
If this is supported by your mobile telephone, you can
access the dialled, received and missed calls on your
mobile telephone. By pressing the green key
"SEND" on the touch-screen you can call the selected
telephone numbers.

NOTE:
If this function is not supported by your mobile
telephone, DOWNLOAD FAIL. is shown briefly on the
touch-screen.
DIALED Here you can display the last telephone
numbers that have been dialled.
RECEIVED Here you can display a list of the last
telephone numbers received.
MISSED Here you can display the calls received in
your absence.
05_AR4026DVD_AEG_SK.indd 36
• PHONE BOOK
If this is supported by your mobile telephone, you can
access the telephone numbers stored on your mobile
phone. By pressing the green key
the touch screen you can call the selected number.

NOTE:
If this function is not supported by your mobile
telephone, „Download Fail." is shown briefly on the
touch-screen.
Outgoing calls
1. Select Bluetooth mode.
2. The telephone number you are calling is entered via
the number keys. The number entered is shown on the
display of the car radio.

NOTE:
If you have entered one or more numbers incorrectly,
you can delete the numbers with the BND/C/RDM
(Fig. 1/23) key or with „CLEAR" on the touch-screen.
• Short press: the numbers are deleted individually.
• Long press: all of the numbers that have been
entered are deleted.
3. In order to call the desired number, then press the green
key or with
ING is shown on the touch-screen and then TALKING
HANDS FREE.
Re-dialling
The device stores the last telephone number that has been
dialled. In order to call this up, please proceed as follows:
1. Press the green key
or on the touch-screen. The words LAST CALL and the
last telephone number that was dialled are shown in the
display
2. Press the green key again
number.
or with
Incoming telephone calls
In the case of incoming telephone calls a ringing tone is
heard from the loudspeakers and - if the caller has a telephone
which supports CLIP "Calling Line Identification Presentation
- the caller' s number appears in the display of the car radio .
Otherwise the word RINGING appears in the display.
• In order to receive an incoming telephone call, press the
key or . You can then hear the caller through the
loudspeakers in your car.
Transferring telephone calls between the car radio and
mobile telephone
It is possible to transfer a call back to your mobile telephone.
1. In order to do this, press the "TRANSFER" key on the
touch-screen. CALL TRANSFER appears on the display
(Fig. 2/7). The car radio activates the MUTE mode.
2. Press this key again to transfer the call to the car radio.
or with "SEND" on
on the touch-screen. The word CALL-
(on the device or remote control)
or in order to dialled the
03.08.11 12:32