Installing The Driver For An Onboard Graphics Card; Installing The Driver For An Hba Card - Lenovo ThinkServer RD340 Operating System Installation Manual

19. When the installation is completed, remove the operating system installation disc from the optical drive.
20. Press Ctrl+Alt+F2 to go to the command window and then use the following commands to install
the drivers:
cat /proc/partitions
mkdir /tmp/fd0
mount /dev/sdb /tmp/fd0
cd tmp/fd0
./replace_ahci.sh
Notes:
• Ensure that the USB storage device is connected to your server.
• In the command lines, sdb represents the drive letter of the USB storage device.
21. Press Ctrl+Alt+F6 to return to the graphics interface. Then, click Reboot to restart your server.
22. The setup process continues after the server restarts. In the Welcome window, click Forward.
23. Click Yes, I agree to the License Agreement, and then click Forward.
24. In the Firewall window, check and configure the settings as you need, and then click Forward.
25. In the SELinux window, check and configure the settings as you need, and then click Forward.
26. In the Kdump window, configure the settings as you need, and then click Forward.
27. Set your time and date, and then click Forward.
28. In the Set Up Software Updates window, configure the settings as you need, and then click Forward.
29. In the Finish Update Setup window, click Forward.
30. Set your user name and password in the Create User window, and then click Forward.
31. When the Additional CDs window is displayed asking you if you need to install additional software
programs from a CD or DVD, depending on your needs, click Install to continue or click Finish to
complete the installation.
32. Enter your user name and password to log in to the operating system.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Copy the driver for an onboard graphics card from the ThinkServer EasyStartup DVD to your local
drive. Double-click the EXE file to unzip it to a folder. Copy the folder to your USB storage device and
connect the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /xorg71
rpm –ivh xorg71-0.97-5.i386.rpm
Note: In the command lines, xorg71 represents the name of the driver package file and
xorg71-0.97-5.i386.rpm represents the driver name. Use the corresponding file name on your server.
4. Restart your server.

Installing the driver for an HBA card

To install the driver for an HBA card, do the following:
30
ThinkServer RD340 and RD440 Operating System Installation Guide