Installing The Driver For The Chipset; Installing The Driver For An Ethernet Card; Installing The Driver For An Onboard Graphics Card - Lenovo ThinkServer RD340 Operating System Installation Manual

Installing the driver for the chipset

To install the driver for the chipset, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. In the "End User License Agreement" window, click Accept.
3. In the installation window, click Driver Install.
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and the driver from the Select a Driver drop-down list box.
5. Click Install.
Note: If prompted, click Yes.
6. In the "Welcome to the Setup Program" window, click Next.
7. In the License Agreement window, click Yes.
8. In the Readme File Information window, click Next.
Note: If prompted, select Always trust software from Intel Corp-Chipset INF and click Install.
9. In the Setup Progress window, click Next.
10. Select Yes, I want to restart this computer now. Then, click Finish to restart your server.

Installing the driver for an Ethernet card

To install the driver for an Ethernet card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. In the "End User License Agreement" window, click Accept.
3. In the installation window, click Driver Install.
4. Select your server model from the Server Model drop-down list box, the operating system from the
Operating System drop-down list box, and the driver from the Select a Driver drop-down list box.
5. Click Install to install the driver.
Note: If prompted, click Yes.
6. If prompted, click Yes to restart your server.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Log in to the operating system and insert the ThinkServer EasyStartup DVD into the optical drive. The
ThinkServer EasyStartup DVD runs automatically.
Note: If the DVD does not run automatically, click Run launch.exe in the AutoPlay window.
2. In the "End User License Agreement" window, click Accept.
3. In the installation window, click Driver Install.
4. Select your server model from the Server Model drop-down list box. Select the operating system
from the Operating System drop-down list box.
.
Chapter 2 Installing an operating system in legacy mode
5