Installing The Driver For A Cna Card; Installing The Driver For Intel Management Engine Interface; Installing The Citrix Xenserver Hypervisor - Lenovo ThinkServer RD340 Operating System Installation Manual

Installing the driver for a CNA card

The driver for a CNA card is installed during the operating system installation.

Installing the driver for Intel Management Engine Interface

To install the driver for Intel Management Engine Interface (MEI), do the following:
1. Download the driver for Intel Management Engine Interface from the Lenovo Web site to a USB storage
device. The most up-to-date device drivers for various server models are always available on the
Lenovo Web site at:
http://www.lenovo.com/drivers
2. Double-click the EXE file to unzip it to a folder and then connect the USB storage device to your server.
3. Use the following commands to install the driver:
e:
cd /MEI
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and /MEI
represents the name of the folder where the driver is stored.
4. Restart your server after the installation is completed.

Installing the Citrix XenServer hypervisor

This topic provides instructions on how to install the following hypervisors:
• Citrix XenServer 6.0.2 hypervisor
• Citrix XenServer 6.1 hypervisor
To install the Citrix XenServer hypervisor, do the following:
1. Insert the installation disc into the optical drive that you have set as the first startup device. Then,
start the server from the optical drive.
2. When the "Citrix XenServer installation welcome" window is displayed, press Enter.
3. Select the appropriate keyboard for the system, select OK, and then press Enter.
4. When the Citrix XenServer setup window is displayed, select OK and then press Enter.
5. Read the End User License Agreement, select Accept EULA, and then press Enter.
Note: If the Action To Perform window is displayed, configure the settings as you need. Select OK
and then press Enter.
6. Select the hard disk drive that you want to use for virtual machine storage. Select OK, and then press
Enter.
7. Select the installation source as you need. Select OK, and then press Enter.
8. Select Yes when prompted to install the supplemental packs and then press Enter.
9. Depending on your needs, select Verify installation source to check all the installation media or select
Skip verification to skip the check. Then select OK and press Enter.
10. Set your password, select OK, and then press Enter.
11. Depending on your needs, select an Ethernet adapter, select OK, and then press Enter.
12. Configure the IP information as you need. Select OK and press Enter.
13. In the "Hostname and DNS Configuration" window, configure the settings as you need. Then select
OK and press Enter.
14. Specify your time zone by selecting the nearest city in your time zone. Select OK, and then press Enter.
48
ThinkServer RD340 and RD440 Operating System Installation Guide