Installing The Driver For The Chipset; Installing The Driver For An Ethernet Card; Installing The Driver For An Onboard Graphics Card - Lenovo ThinkServer RD340 Operating System Installation Manual

• For the Microsoft Hyper-V Server 2008 operating system:
a. Press Ctrl+Alt+Delete when prompted. Click Other User.
b. Type Administrator in the User name field. Then press Enter.
c. Follow the instructions on the screen to change the password.
• For the Microsoft Hyper-V Server 2008 R2 operating system with Service Pack 1:
When prompted, follow the instructions on the screen to change the password.
Note: The password must be a combination of upper case letters, lower case letters, and numbers.

Installing the driver for the chipset

To install the driver for the chipset, do the following:
1. Copy the driver for the chipset from the ThinkServer EasyStartup DVD that comes with your server to a
USB storage device. Connect the USB storage device to your server.
2. Use the following commands to install the driver:
e:
cd Chipsetwindows
cd Win7
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and
Chipsetwindows\Win7 represents the subdirectory where your driver is located.
3. Click Install. The installation begins.
4. Restart your server after the installation is completed.

Installing the driver for an Ethernet card

To install the driver for the Ethernet card, do the following:
1. Copy the driver for the Ethernet card from the ThinkServer EasyStartup DVD that comes with your server
to a USB storage device. Connect the USB storage device to your server.
2. Use the following commands to install the driver:
e:
cd NICWIN2K8X86
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and
NICWIN2K8X86 represents the name of the folder where the driver is stored.
3. Restart your server after the installation is completed.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Copy the driver for an onboard graphics card from the ThinkServer EasyStartup DVD that comes with
your server to a USB storage device. Connect the USB storage device to your server.
2. Use the following commands to install the driver:
e:
cd VGA
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and VGA
represents the name of the folder where the driver is stored.
3. Restart your server after the installation is completed.
42
ThinkServer RD340 and RD440 Operating System Installation Guide