Installing Drivers For The Windows Small Business Server 2011 Standard Operating System; Installing The Microsoft Windows Small Business Server 2011 Premium Add-On Operating System - Lenovo ThinkServer RD340 Operating System Installation Manual

Installing drivers for the Windows Small Business Server 2011 Standard
operating system
To install drivers for the Windows Small Business Server 2011 Standard operating system, refer to the
related topics.
• "Installing the driver for the chipset" on page 5 .
• "Installing the driver for an Ethernet card" on page 5 .
• "Installing the driver for an onboard graphics card" on page 5 .
• "Installing the driver for an HBA card" on page 6 .
• "Installing the driver for Intel Management Engine Interface" on page 6 .
• "Installing the driver for a CNA card" on page 6 .
Installing the Microsoft Windows Small Business Server 2011 Premium
Add-on operating system
This topic provides instructions on how to install the Microsoft Windows Small Business Server 2011
Premium Add-on operating system.
To install the Microsoft Windows Small Business Server 2011 Premium Add-on operating system, do the
following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
Note: If the message Press any key to boot from cd is displayed, press any key. If the message Windows
Setup [EMS Enabled] is displayed, press Enter.
2. In the Installing Windows window, select the language and other options. Then, click Next.
3. Click Install now.
4. Select the operating system that you want to install, and then click Next.
5. Read the license terms and select I accept the license terms. Then, click Next.
6. Select the type of installation as you need. The following steps are based on the scenario that Custom
(Advanced) is selected in this step.
7. In the "Where do you want to install Windows?" window, connect the USB storage device that contains
the driver to your server and click Load Driver.
8. Go to the folder where the driver is stored and click OK.
9. Select the driver that you want to install and click Next to install the driver.
10. In the "Where do you want to install Windows?" window, click Drive options (advanced).
11. Select the hard disk drive on which you want to install the operating system, and then click New.
12. Type the amount of space (in MB), and then click Apply.
13. In the Install Windows window, click OK.
14. Ensure that the drive partition is correct, and then click Next. The installation begins.
15. Change your password when prompted.
Note: The password must be a combination of upper case letters, lower case letters, and numbers.
16. Follow the instructions on the screen to log in to the operating system when prompted.
.
Chapter 2 Installing an operating system in legacy mode
11