Maintenance And Cleaning; Disposal; Information; Service Centre - Parkside PWS 230 Operation And Safety Notes

Operation / Maintenance and cleaning / Disposal / Information
Switching on continuous operation mode
j Press the safety lock-out
pressed.
Press the ON / OFF switch
the safety lock-out until the latter locks.
Switching off continuous operation mode:
j Press and then release the ON / OFF switch
Rotating the hand grip
j Pull the mains plug out of the mains socket be-
fore you carry out any task on the device.
j The hand grip
can be rotated by 90° to
1
the right or left.
j This allows the On / Off switch
brought into the most comfortable position for
any working conditions.
j Press the unlocking button
hand grip to the right or left.
1
j Make sure the hand grip

Maintenance and cleaning

Q
J
Pull the mains plug out of the mains socket
before you carry out any task on the device.
J
Do not use sharp objects for cleaning the
device. Do not allow any liquids to enter the
device.
j Have the carbon brushes replaced only at the
service centre or an accredited electrical
equipment repair centre. The device requires
no other maintenance.
j Clean the device frequently; for best results do
this immediately after you have finished using it.
j Use a dry cloth to clean the housing – under
no circumstances use petrol, solvents or cleaning
agents that attack plastic.
j A vacuum cleaner is required to thoroughly
clean the device.
j Ventilation openings must always be kept free.
j Remove any adhering dust with a narrow paint
brush.
14 GB/IE/CY
and keep it
3
in the area of
2
2
to be
2
and rotate the
4
engages.
1

Disposal

Q
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electric tools in
the household waste!
In accordance with European Directive
2002 / 96 / EC (covering waste electrical and elec-
tronic equipment) and its transposition into national
legislation, worn out electrical power tools must be
collected separately and taken for environmentally
compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.

Information

Q

Service centre

Q
The service centre for your country is shown in the
warranty documentation.
J
Have your device repaired only by qualified
specialist personnel using original manufactur-
er parts only. This will ensure that your device
remains safe to use.
J
If the plug or mains lead needs to be replaced,
always have the replacement carried out by
the manufacturer or its service centre. This will
ensure that your device remains safe to use.