Page 1
Angle Grinder Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. PWS 230 Angle grinder GB / IE / CY Operation and Safety Notes Page Operation and Safety Notes Kompernaß GmbH Burgstraße 21...
Advice on use .......................Page 12 Original accessories /attachments ................Page 12 Preparing for use Attaching the disc guard cover using the quick-release fastener ........ Page 12 Attaching the auxiliary handle ..................Page 13 Attaching and replacing roughing / grinding / cutting discs ..........Page 13 Operation Switching on and off ....................Page 13...
Introduction The following pictogrammes / symbols are used in these operating instructions: Read the operating instructions! Watts (effective power) Always heed warning labels and Protection category II power tool; safety instructions! double insulated Caution - Danger of electric shock! Hazardous Wear hearing protection, dust protection mask, voltage –...
Avoid touching earthed surfaces such as pipes, Values determined in accordance with EN 50144 radiators, ovens and refrigerators with any part of your body. There is an increased risk of elec- tric shock if your body is earthed. GB/IE/CY...
Do not let anyone use the device if he or she is Do not operate the device if the mains lead or not familiar with it or has not read the instructions mains plug is damaged.
Page 8
Wear hearing protection, protective it through a residual current device (RCD) with glasses, a dust protection mask and a maximum trip current of 30 mA. If using an protective gloves. extension lead, always use one that is approved For longer periods of cutting or grinding wood, for outdoor use.
Page 9
/ cup brush / disc brush / flap disc. Make sure that the dimensions of the disc are Switch on the device before placing it against the workpiece.
Preparing for use Observe the requirements of these documents. Be- fore you start a task, seek the advice of a compe- tent structural engineer, architect or the relevant site Take note of the mains voltage. The mains voltage management staff.
(see arrow on the head of the device). Take note of the dimensions of the roughing / grind- ing or cutting discs. The circular hole must fit on to Operation the mounting flange without play. Do not use a re- ducer piece or adapter.
Rotating the hand grip In accordance with European Directive j Pull the mains plug out of the mains socket be- 2002 / 96 / EC (covering waste electrical and elec- fore you carry out any task on the device.
EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) Type / device description: Angle grinder PWS 230 Bochum, 31.10.2007 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of further development. GB/IE/CY...