Recommended - Through Wall With Vertical Rise And Horizontal Termination Installation; Through Concrete Wall With Vertical Rise Installations - HAMPTON BAY GC60 Technical Manual

RECOMMENDED - T
A 45° down elbow with a screen may be used in
place of the termination cap (or stainless steel
termination hood).
T C
HROUGH ONCRETE
Installation to use if there is a concrete or
retaining wall in line with exhaust vent on
pellet stove.
A 45° down elbow with a screen may be used
in place of the termination cap (or stainless
steel termination hood).
The termination must be 12 inches (30 cm)
from the outside wall and 12 inches (30 cm)
above the ground.
Hampton GC60 Cast Pellet Stove Technical Manual
Installation
W W
HROUGH ALL ITH
W W V
ALL ITH ERTICAL
V R H
ERTICAL ISE AND ORIZONTAL
Elbow with
Screen or
Termination Cap
4" 90
Wall framing
Clean out Tee
Horizontal frame
for thimble
Figure 13: Venting horizontally with rise.
R I :
ISE NSTALLATIONS
Horizontal frame
for thimble
4" 90 Elbow
Wall Thimble
4" 45 Elbow
with screen or
Termination
Cap
Vertical section
of 4" pipe
Figure 14: Venting with concrete wall behind unit .
T I
ERMINATION NSTALLATION
Wall Strap
4'
MAX
Vertical
section of
4" vent
pipe
Wall Strap
Wall Thimble
Wall Framing
Clean Out Tee
Concrete Wall
15
: