Connecting The Cables - HP ProDisplay P17A LED Backlit User Manual

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect the VGA signal cable provided.
3. Connect one end of the power cord to the AC power connector on the back of the monitor, and
the other end to an electrical wall outlet.
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one
may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from
the electrical outlet, grasp the cord by the plug.
4 Chapter 2 Setting Up the Monitor
To reduce the risk of electric shock or damage to the equipment: