Download Print this page
HP ProDisplay P19A Specification
HP ProDisplay P19A Specification

HP ProDisplay P19A Specification

19-inch led backlit monitor
Hide thumbs Also See for ProDisplay P19A:

Advertisement

Quick Links

QuickSpecs
Overview
1. OK/Menu
If the OSD menu is on, press to select the
highlighted menu item.
Opens, selects or exits the OSD menu.
2. Auto/Minus
If the OSD menu is inactive, press to
activate the auto adjustment feature to
optimize the screen image.
If the OSD menu is on, press to navigate
backward through the OSD menu and
decrease adjustment levels.
HP ProDisplay 19A dual monitor configuration shown.
(Note: monitors sold separately)
DA - 14553 North America — Version 4 — November 12, 2013
HP ProDisplay P19A 19-inch LED Backlit Monitor
3. Plus
If the OSD menu is on, press to navigate
forward through the OSD menu and
increase adjustment levels.
4. Power LED
White = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
5. Power
Turns the monitor on or off.
HP recommends a dual monitor configuration for a more
productive work environment. *
*NOTE: Multi-monitor support is dependent on your system.
Check your user guide or technical specifications for
compatibility. Optional accessories may be required.
Page 1

Advertisement

loading

Summary of Contents for HP ProDisplay P19A

  • Page 1 5. Power Turns the monitor on or off. decrease adjustment levels. HP recommends a dual monitor configuration for a more productive work environment. * *NOTE: Multi-monitor support is dependent on your system. Check your user guide or technical specifications for HP ProDisplay 19A dual monitor configuration shown.
  • Page 2 QuickSpecs HP ProDisplay P19A 19-inch LED Backlit Monitor Overview Model: D2W67AA DA - 14553 North America — Version 4 — November 12, 2013 Page 2...
  • Page 3: Technical Specifications

    Color Gamut (typical)* Color Support** Can display up to 16.7 million colors *All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. ** With the use of FRC technology. User Controls...
  • Page 4 QuickSpecs HP ProDisplay P19A 19-inch LED Backlit Monitor Technical Specifications Video/Other Inputs Plug and Play Input Connectors VGA (analog) None Video Cables (1) VGA Video Cable Length 1,8 m (5.9 ft) Audio None Power Power Supply Internal Input Power 100~240Vac, 50/60 Hz...
  • Page 5: Additional Information

    This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive - 2002/95/EC. This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive - 2002/96/EC. This product is in compliance with California Proposition 65 (State of California;...
  • Page 6 RoHS Directive on a worldwide basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually = to levels below legal limits) for all HP electronic products subject to the RoHS Directive, except where it is widely recognized that there is no technically feasible alternative (as indicated by an exemption under the EU RoHS Directive).
  • Page 7 QuickSpecs. HP Integrated Work Allows mounting of a 17 - 24 inch diagonal HP LCD monitor and an HP Compaq dc8000 series Ultra-slim Desktop PC as well as select HP Thin Clients on a single Center Stand - USDT and stand for the convenience of an "all-in-one"...
  • Page 8 ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws).