Recognizing Preset Display Resolutions; Entering User Modes - HP ProDisplay P17A LED Backlit User Manual

Table A-1 ProDisplay P17A LED Backlit Monitor Specifications (continued)
Measured Power Consumption:
Full Power
Typical Settings
Sleep
Switch Off
Input Terminal
NOTE: For the latest specifications or additional specifications on this product, go to
http://www.hp.com/go/productbulletin/
specific QuickSpecs.

Recognizing Preset Display Resolutions

The display resolutions listed below are the most commonly used modes and are set as factory
defaults. This monitor automatically recognizes these preset modes and they will appear properly
sized and centered on the screen.
Table A-2 ProDisplay P17A Factory Preset Modes
Preset
1
2
3
4
5
6
7
8

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:
●
You are not using a standard graphics adapter.
●
You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen
display. Your changes can be made to any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are at least 10 user modes that can be entered and
stored.
20 watts
15.2 watts
<0.5 watts
<0.5 watts
One VGA connector (cable included)
and search for your specific display model to find the model-
Pixel Format Horz Freq (kHz)
640 × 480 31.469
720 × 400 31.469
800 × 600 37.879
1024 × 768 48.363
1280 x 720 45.000
1280 x 800 49.306
1280 × 960 60.00
1280 × 1024 63.98
Vert Freq (Hz)
59.940
70.087
60.317
60.004
60.000
59.910
60.00
60.02
Recognizing Preset Display Resolutions 13