Digital Audio Setup Page - Silvercrest KH 6500 Instruction Manual

SCREEN SAVER
* * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * *
TV DISPLAY TV DISPLAY TV DISPLAY WIDE WIDE WIDE
ANGLE MARK ANGLE MARK ANGLE MARK OFF OFF OFF
OSD LANGUAGE OSD LANGUAGE OSD LANGUAGE ENG ENG ENG
CLOSED CAPTIONS CLOSED CAPTIONS CLOSED CAPTIONS OFF OFF OFF
SCREEN SAVER SCREEN SAVER SCREEN SAVER ON ON ON ON ON ON
LAST MEMORY LAST MEMORY LAST MEMORY OFF OFF OFF OFF OFF OFF
SCREEN SAVER SCREEN SAVER SCREEN SAVER
• To activate the screen saver set this function to
ON. The screen saver will now switch on when
the playback is stopped and no activity takes
place for several minutes.
• To switch the screen saver off set the function to
OFF.
LAST MEMORY
* * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * *
TV DISPLAY TV DISPLAY TV DISPLAY WIDE WIDE WIDE
ANGLE MARK ANGLE MARK ANGLE MARK OFF OFF OFF
OSD LANGUAGE OSD LANGUAGE OSD LANGUAGE ENG ENG ENG
CLOSED CAPTIONS CLOSED CAPTIONS CLOSED CAPTIONS OFF OFF OFF
SCREEN SAVER SCREEN SAVER SCREEN SAVER ON ON ON
LAST MEMORY LAST MEMORY LAST MEMORY OFF OFF OFF ON ON ON
OFF OFF OFF
SET LAST MEMORY STATE SET LAST MEMORY STATE SET LAST MEMORY STATE
• Select the setting ON to playback a disc from
the previous halted position after removal and re-
insertion.
• with the setting OFF disc playback starts from the
beginning.
Note:
When the DVD player is switched off the
saved position is not retained.

8.2 DIGITAL AUDIO SETUP PAGE

DIGITAL OUTPUT
* * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT RAW RAW RAW
LPCM OUTPUT LPCM OUTPUT LPCM OUTPUT 48 K 48 K 48 K
SETUP SPDIF SETUP SPDIF SETUP SPDIF
Select the input DIGITAL OUTPUT to set the SPDIF
audio output signal.
Select OFF when there is to be no digital
OFF:
signal output.
Select PCM (Pulse Code Modulation)
PCM:
when a connection to a digital
amplifier/receiver exists. Your DVD player
transmits, through the PCM signal, the
same audio formats that are rendered on
the disc. In addition there will be an audio
signal output via the left/right connection.
The DVD player outputs the raw data of
RAW:
the Dolby Digital sound (default setting).
* * * * * * DIGITAL AUDIO SETUP PAGE DIGITAL AUDIO SETUP PAGE * * DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT PCM PCM PCM
LPCM OUTPUT LPCM OUTPUT LPCM OUTPUT 48 K 48 K 48 K
SETUP LPCM SETUP LPCM SETUP LPCM
Select the input LPCM OUTPUT to set the sampling
frequency for the processing of the raw data.
Default setting.
48 K:
Only for DVDs with the corresponding
96 K:
sampling frequency.
Note:
The LPCM OUTPUT function is only available if
you have set the SPDIF audio output signal to
PCM.
- 14 -
OFF OFF OFF
RAW RAW RAW
PCM PCM PCM
* * * *
48 K 48 K 48 K
96 K 96 K 96 K