AVI, MPEG 4, Xvid, JPEG (Foto-CD) Regional code: 2. Intended use The SilverCrest KH 6524/25 DVD player is intended exclusively for stationary use in enclosed spaces. The device is intended exclusively for private, non-commercial use. The device is intended for use as a home entertainment device.
Remove the protective foil from the display. Place the DVD player on a flat, even and firm base. Do not subject the device to any external heat or moisture source. Make sure that the device has sufficient ventilation on all sides. Do not place any television directly on top of the DVD player.
The DVD player can be connected to televisions which operate with the PAL and NTSC standards. If you want to use the DVD player on a television with the NTSC standard you must change the video setting in the DVD players "OSD menu". There PAL is set as the television standard at the factory.
8.1 Connecting to a television via ScartCable/RGB Note: Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection. Select this connection variation in the case of televisions equipped with an RGB input. If you are not sure if the television is equipped with an RGB input then you can check this by consulting the television's instruction manual.
DVD player. If you connected the DVD player to the television via a Scart cable the audio signal will be transmitted via the cinch cable to your HiFi system as well as via the Scart cable to the television.
Connection via coaxial cable To connect the DVD player to a digital audio component with a digital coaxial cable: • Connect the "COAXIAL" inscribed plug to the corresponding socket on the digital audio component. Connecting via optical cable To connect the DVD player to a digital audio component with an optical cable: •...
• To switch the DVD player on activate the of the DVD player. If the DVD player is already switched on but is in STANDBY standby mode, press the button switch the DVD player on. The standby mode is identified by the LED in the display on the front panel of the device.
Deactivate function. The disc playback starts back at the begining after removing and then reinserting. Note: POWER If the DVD player is turned off with the be preserved. 10.3 Setup menu AUDIO In this OSD menu you can, for example, carry out settings for the analogue as well as the digital audio outputs.
Note: This setting is only active if the HDMI setup is deactivated. The composite video output on the DVD player is always activated. If the selected setting deviates from the actual connection variation (apart from composite video) it is possible that no image or a poor image will be displayed on the television screen.
Only a few DVDs have a technical age restriction available. If there is no technical age restriction on the DVD your DVD players child lock feature can not be activated. The child lock can only function if it is activated on the DVD player and a corresponding code is available on the inserted DVD.
DVD player is connected correctly to the television you will now see the "Silvercrest" logo on the TV screen • Open the disc tray on the front panel of the DVD player by pressing the OPEN/CLOSE button.
(Background information, "Making of" etc.) If such a menu is present on the DVD inserted in the DVD player you can access it during playback by pressing the You can select particular menu options by pressing the control buttons...
Title number input via the number buttons Note: This function may not be available on all DVDs! If you attempt to execute a function that is not available, the symbol screen. Instead of using the Skip function you can also enter the title from within the film on the inserted DVD/VCD/S-VCD direct by entering the title number via the number buttons on the remote control.
Image enlargement (Zoom) Note: This function may not be available on all DVDs! If you attempt to execute a function that is not available, the symbol screen. During the playback of an inserted DVD/VCD/S-VCD you can enlarge the image on the television screen in three levels. For this press the on the remote control to set the following enlargement levels: With the control buttons sections of the enlargement can be...
During the programmed playback the notice PROGRAM appears in the display. To delete the programmed playback press twice, during playback, the button on the front panel of the DVD player or on the remote control. Note: If you are not sure what number a title and/or chapter to be programmed has...
13. Playback of JPEG-Photo CD/WMA/MP3/MPEG4 Insert a storage medium into the DVD player. If you use a memory card or USB stick press repeatedly the button until the desired playback source is depicted. The contents of the data carrier (CD, DVD, USB memory stick or memory card)
15. Cleaning of the DVD player Clean the housing of the DVD player with a slightly damp cloth and a mild cleanser only. When cleaning, make sure that no moisture gets into the DVD player! Clean the inside of the disc tray, if necessary, exclusively with a clean dry brush (i.e.
This can be the case especially if the DVD player has been subjected to strong temperature fluctuations. If this is the case place the DVD player in a dry environment at normal room temperature. First remove the currently inserted disc from the disc tray.
Repairs made after the expiration of the warranty period are subject to payment. 20. Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www.kompernass.com...
Country Telephone Date/Signature Description of the defect: Warranty DES UK LTD Tel.: 0871 5000 700 (£ 0.10 / minute) e-mail: email@example.com Kompernass Service Ireland Tel.: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: firstname.lastname@example.org...