Testing An Ac Adapter; Shutting Down The Computer - HP EliteBook 2740p User Manual

Testing an AC adapter

Test the AC adapter if the computer exhibits any of the following symptoms:
●
The computer will not turn on when connected to the AC adapter.
●
The display does not turn on when the computer is connected to the AC adapter and external
power.
●
The power light is off when the computer is connected to the AC adapter.
To test the AC adapter:
1. Remove the battery from the computer.
2. Connect the AC adapter to the computer and to an AC outlet.
3. Turn on the computer.
●
●
Contact technical support for information on obtaining a replacement AC power adapter. Select
Start > Help and Support > Get assistance.

Shutting down the computer

CAUTION:
The Shut down command closes all open programs, including the operating system, and then turns
off the display and computer.
Shut down the computer under any of the following conditions:
●
When you need to replace the battery or access components inside the computer
●
When you are connecting an external hardware device that does not connect to a USB port or a
1394 port
●
When the computer will be unused and disconnected from external power for an extended
period
Although you can shut down the computer with the power switch, the recommended procedure is to
use the Windows Shut down command.
To shut down the computer, follow these steps:
NOTE:
Hibernation before shutdown is possible.
1. Save your work and close all open programs.
2. Click Start.
3. Click Shut down.
Downloaded from LpManual.com Manuals
If the power light turns on, the AC adapter is functioning properly.
If the power light remains off, the AC adapter is not functioning and should be replaced.
Unsaved information will be lost when the computer is shut down.
If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or
Testing an AC adapter 81