Entering An Automatic Drivelock Password; Removing Automatic Drivelock Protection - HP EliteBook 2740p User Manual
Hide thumbs
Also See for EliteBook 2740p:
- User manual (179 pages) ,
- Maintenance and service manual (117 pages) ,
- Driver installation (20 pages)
Table of Contents
Advertisement
Entering an Automatic DriveLock password
To enable an Automatic DriveLock password in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then
press enter.
4.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
5.
Read the warning. To continue, select YES.
6.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Removing Automatic DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then
press enter.
4.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
5.
Use a pointing device or the arrow keys to select Disable protection.
6.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
114 Chapter 11 Security
Downloaded from LpManual.com Manuals
f10
to enter BIOS Setup.
f10
to enter BIOS Setup.
esc
while the "Press the ESC key for Startup
esc
while the "Press the ESC key for Startup
Advertisement
Table of Contents
