Enabling Boot Devices In Computer Setup - HP EliteBook 2740p User Manual

Enabling boot devices in Computer Setup

The computer will boot to a USB device or a NIC device only if the device has first been enabled in
Computer Setup.
To start Computer Setup and enable a USB device or a NIC device as a boot device, follow these
steps:
1. Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2. Press
3. To enable bootable media in USB drives or in drives inserted into an optional docking device
(select models only), use a pointing device or the arrow keys to select System Configuration >
Device Configurations. Confirm that the box next to USB legacy support is checked.
NOTE:
at the factory. If the port becomes disabled, reenable it by selecting System Configuration >
Port Options, and then selecting USB Port.
– or –
To enable a NIC device, select System Configuration > Boot Options, and then select PXE
Internal NIC boot.
4. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE: To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load
(RPL) server without using MultiBoot, press
message is displayed at the bottom of the screen, and then quickly press f12.
144 Chapter 15 MultiBoot
Downloaded from LpManual.com Manuals
f10 to enter BIOS Setup.
The USB Port option must be enabled in order to use USB legacy support. It is enabled
esc while the "Press the ESC key for Startup
esc while the "Press the ESC key for Startup Menu"