Using Hp 3D Driveguard; Identifying Hp 3D Driveguard Status - HP EliteBook 2740p User Manual

Using HP 3D DriveGuard

HP 3D DriveGuard protects the hard drive by parking the drive and halting I/O requests under either
of the following conditions:
●
You drop the computer.
●
You move the computer with the display closed while the computer is running on battery power.
A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal
operation.
NOTE: If the upgrade bay contains a hard drive, the hard drive is protected by HP 3D DriveGuard.
Hard drives installed in optional docking devices or connected to USB ports are not protected by HP
3D DriveGuard.
Because solid-state drives lack rotating parts, protection by HP 3D DriveGuard is unnecessary.
For more information, refer to the HP 3D DriveGuard software Help.

Identifying HP 3D DriveGuard status

The drive light on the computer changes to an amber color to show that the drive is parked. To
determine whether drives are currently protected or whether a drive is parked, select Start > Control
Panel > Hardware and Sound > Windows Mobility Center:
●
If the software is enabled, a green check mark is superimposed over the hard drive icon.
●
If the software is disabled, a white diagonal line is superimposed over the hard drive icon.
●
If the drives are parked, a yellow moon is superimposed over the hard drive icon.
NOTE: The icon in the Mobility Center may not show the most up-to-date status for the drive. For
immediate updates after a change in status, you need to enable the notification area icon.
To enable the notification area icon:
1. Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard.
NOTE:
2. On the Icon in system tray row, click Show.
3. Click OK.
If HP 3D DriveGuard has parked the drive, the computer will behave in the following ways:
●
The computer will not shut down.
●
The computer will not initiate Sleep or Hibernation, except as described in the following Note.
NOTE:
DriveGuard allows the computer to initiate Hibernation.
Before you move the computer, HP recommends that you either shut it down, or initiate Sleep or
Hibernation.
86 Chapter 7 Drives
Downloaded from LpManual.com Manuals
If prompted by User Account Control, click Yes.
If the computer is running on battery power and reaches a critical battery level, HP 3D