Using Usb Legacy Support - HP EliteBook 2740p User Manual

CAUTION:
device.
To remove a USB device:
1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far
right of the taskbar.
NOTE:
icon (the arrow at the left side of the notification area).
2. Click the name of the device in the list.
NOTE:
3. Remove the device.

Using USB legacy support

USB legacy support (enabled at the factory) permits the following actions:
●
Using a USB keyboard, mouse, or hub connected to a USB port on the computer during startup
or in an MS-DOS-based program or utility
●
Starting or restarting from an optional external MultiBay or an optional USB bootable device
To disable or reenable USB legacy support in Computer Setup, follow these steps:
1. Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2. Press
3. Use a pointing device or the arrow keys to select System Configuration, and then select
Device Configurations.
4. To disable USB legacy support, clear the check box next to USB legacy support. To reenable
USB legacy support, select the check box next to USB legacy support.
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then follow the on-screen
instructions.
Your changes go into effect when the computer restarts.
Downloaded from LpManual.com Manuals
To prevent damage to a USB connector, do not pull on the cable to remove the USB
To display the Safely Remove Hardware and Eject icon, click the Show hidden icons
You are informed that it is safe to remove the hardware device.
f10 to enter the BIOS Setup.
esc while the "Press the ESC key for Startup
Using a USB device 93