Safety Instructions - Reloop IQ2 MIDI Instruction Manual

CAUTION! For your own safety, please read this instruction manual carefully before initial operati-
on! All persons involved in the installation, setting-up, operation, maintenance and service of this
device must be appropriately qualified and observe this operation manual in detail. This product
complies with the requirements of the applicable European and national regulations. Conformity
has been proven. The respective statements and documents are deposited at the manufacturer.
CONTENTS
1.
2.
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
4.
5.
5.1
5.1.1
5.1.2 Internal Mixer Mode........................................................ 38
5.2
5.2.1 XF MIDI .............................................................................. 40
5.2.2 FX MIDI............................................................................... 40
5.2.3 MIDI 1 / 2 ............................................................................ 41
5.3
5.4
6.
7.
8.
Congratulations on purchasing your Reloop IQ2 MIDI. Thank you for placing your trust in our disc
jockey technology. Before operating this equipment we ask you to carefully study and observe all
instructions.
Please remove the Reloop IQ2 MIDI from its packaging. Check before initial operation to make sure
that the device has not been visibly damaged during transport. If you detect any damage to the po-
wer cable or the casing, do not operate the device. Contact your specialised dealer.

SAFETy INSTRUCTIONS

manual excludes any warranty claims. The manufacturer is not liable for any damage to property
or for personal injury caused by improper handling or non-observance of the safety instructions.
-
-
-
-
-
24
Designations .......................................................... 27
Peripheral Connections ......................................... 29
Operation ................................................................ 30
Power On ........................................................................... 30
Signal Input Selection .................................................... 30
Gain .................................................................................... 30
Equalizer ........................................................................... 30
Channels A+B ................................................................... 30
Crossfader......................................................................... 30
Fader Start ........................................................................ 30
DJ Mic ................................................................................ 31
Modulation ........................................................................ 31
Monitoring ........................................................................ 31
Outputs .............................................................................. 31
Effect Send/Return ......................................................... 31
Beatcounter ...................................................................... 32
DSP Effects ....................................................................... 32
Crossfader Effects .......................................................... 34
ASIO Installation ................................................... 35
MIDI/USB Audio Mode .......................................... 36
Traktor Mapping .............................................................. 36
External Mixer Mode ...................................................... 36
MIDI Assignment ............................................................. 40
MIDI Channel Adjustment ............................................. 41
MIDI Value Map ................................................................ 42
Technical Information ........................................... 43
Minimum System Requirements .......................... 44
Support & Download .............................................. 44
This device left the factory in perfect condition. To maintain this condition and to ensure a risk-
free operation the user must observe the safety instructions and warnings contained in this
operation manual.
For reasons of safety and certification (CE) the unauthorised conversion and/or modification of
the device is prohibited. Please note that in the event of damage caused by the manual modifi-
cation to this device any warranty claims are excluded.
The inside of the device does not contain any parts which require maintenance, with the excepti-
on of wear parts that can be exchanged from the outside. Qualified staff must carry out mainte-
nance, otherwise the warranty does not apply!
The Fuse must exclusively be exchanged against fuses of the same class, with the same trigger
features and nominal current rating.
Ensure that the power will only be supplied after the device has been fully set up. Always plug in
the mains plug last. Ensure that the mains switch is in the "OFF" position when connecting the
device to power.
CAUTION! Please exercise particular caution when
handling the power voltage. This voltage rating
may lead to a critical electrical shock! Any dama-
ge caused by the non-observance of this operation