Remote Ha Control. Remote Ha Setup 2 - Yamaha M7CL Quick Start Manual

The virtual effects rack. remote ha connection. editor connection guide. using scenes, patching monitor out, accessing outport delays

Hide thumbs Also See for M7CL:

Table of Contents

Connection and control of AD8HR remote head amp:

Remote HA control. Remote HA setup 2.

Also if you push the unit image to get to the EXTERNAL

HA pop-up, you can set the AD8HR HPF. The gain can be

set from here, but if we assign the remote HA to a channel,

the channel HA control will also set gain and +48V.

To assign a remote HA to a M7CL channel, first select the input channel's Centralogic™ overview or single

channel screen.

Now the channel HA encoder will operate the remote AD8HR. The panel brightness will affect the AD8HR LED

brightness too!

Push the grey button to the right of the

unit image to bring up the EXTERNAL

HA PORT SELECT pop-up.

From one of these screens, access the PATCH/NAME

pop-up. Press the SLOT tab and choose the slot

number to assign the remote HA to the M7CL channel.

10/20

M7CL Quick Start Guide Part 2

Choose the slot and channels that you

have connected the AD8HR to.

You can move to the next

channel by pressing the

selected channel indicator,

or by pressing a channel

[SEL] key.

If the PATCH/NAME pop-

up opens on the ICON or

NAME page, you can

change to the PATCH page

by using the tabs at the

bottom of the pop-up.

Table of Contents