Graphic Eq. Selecting And Editing The Geqs - Yamaha M7CL Quick Start Manual

The virtual effects rack. remote ha connection. editor connection guide. using scenes, patching monitor out, accessing outport delays

Hide thumbs Also See for M7CL:

Table of Contents

The virtual rack; effects and graphic EQ:

Graphic EQ. Selecting and editing the GEQs.

From the main rack screen, press the virtual rack mounted GEQ. This brings up the GEQ pop-up.

From the GEQ pop-up, press the tab

below the GEQ image with the

frequency range you want to edit. For

example, [200-1k]. The tab will turn

white and the faders of the Centralogic

section will move to match the chosen

frequency range. Moving these faders

will edit the GEQ curve. Press different

tabs to access different frequency

groups.

Zero individual Hz bands by pressing

the [ON] key above the fader.

Flat the whole EQ using the [FLAT]

button on the GEQ pop-up.

Different GEQs can be accessed from

the tabs at the bottom of this pop-up.

Flex15GEQ are selected and edited in

the same way. An AVAILABLE BANDS

count-down is displayed.

7/20

M7CL Quick Start Guide Part 2

Table of Contents