Changing System Settings - Cisco C20 TelePresence System Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents

Changing system settings

All system settings can be changed from the System
Configuration page. The value space for a setting is specified
either as a drop-down list or with explanatory text following a
text input field.
Different settings may require different user credentials. In
order to be sure that an administrator is able to change all
system settings, the user must possess all user roles.
You can read more about user administration and user roles
in the ► User administration chapter.
D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013.
Introduction Web interface Web interface
Navigate to: Configuration > System Configuration
System settings
Drop-down list
Click the arrow to open the drop-down
list. Choose the preferred value and click
Save for the change to take effect.
Text input field
Enter text in the input field and click
for the change to take effect.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
24
Administrator Guide
Setting passwords Appendices
Save